Setting The Date And Time - Sanyo VPC S6 - Xacti Digital Camera Instruction Manual

Setting the Date and Time

Follow the steps below to set the date display style, current date and time.
1. Rotate the mode dial to
pressing the power switch.
2. [Set-up1] is displayed.
3. Use the four-way controller ( ) to select [Date & Time], then
press the button.
4. Press the four-way controller (
Month, Year and Time fields.
To increase a value, press the four-way controller ( ).
To decrease a value, press the four-way controller ( ).
To select the time display in 12-hour or 24-hour format,
press the four-way controller.
5. Press the button after all fields are set.
• The date illustration shown is for the purpose of explanation and may differ from the actual setting of
your camera.
EN-22
and turn your camera on by
) to select date style, Day,
Set-up1 Set-up1 Set-up1 Set-up2 Set-up2 Set-up2 Set-up3 Set-up3 Set-up3
Format Format
Beeper Beeper Beeper Louder Louder Louder
Date & Tim Date & Time te & Time
Langu Language Language En Englis English
Select : Select : Select :
Date & Time Date & Tim te & Time
Date & Time Date & Time Date & Time m / d / y m / d / y m / d / y
01 / 09 / 2007 01 / 09 / 2007 01 / 09 / 2007
00 : 00 00 : 00 00 : 00
Set : Set : Set : Select : Select : Select :
m/d/y m/d/y m/d/y
lish
12h 12h 12h
AM AM AM