Photography Mode; Capture Mode - Sanyo VPC-W800 User Manual

PHOTOGRAPHY MODE

[

] Capture Mode

Your camera is equipped with a 2.7" full color LTPS-TFT LCD monitor to help you compose images,
playback recorded images/video clips or adjust menu settings.
1. Press the ON/OFF button to turn the power on.
The status LED lights green and the camera is initiated.
When the power is turned on, the camera will start in the
mode that was set.
If the power is turned on at [
lens will extend forward and it is ready for shooting. At
both modes, if the mode switch is set to [
barrel will retract into the camera body after 30 seconds.
If the power is turned on at [
remain closed.
2. Slide the mode switch to [
3. Compose your image in the LCD monitor.
Pressing the
enlarges the subject on the LCD monitor.
Pressing the
4. Press the shutter button.
Pressing the shutter button down halfway automatically
focuses and adjusts the exposure, and pressing the shutter
button down fully captures the images.
If the photographic preview is set to "On", the captured
image will be displayed while the image is being recorded
onto the SD/SDHC memory card.
] or [
] mode, the lens will
].
button zooms in on the subject, and
button provides a wider angle image.
] mode, the
], the lens
a
b
EN-23