Setting The Date And Time - Sanyo VPC-S500EX Instruction Manual

Setting the Date and Time

Follow the steps below to set the date display style, current date and time.
1. Rotate the mode dial to
camera on by pressing the power switch.
2. [Set-up1] is displayed.
3. Use the four-way controller ( ) to select
[Date & Time] and the four-way controller
( ) to switch the date types, then press
the button.
4. Press the four-way controller (
select Day, Month, Year and Time fields.
To increase a value, press the four-way
controller ( ).
To decrease
four-way controller ( ).
The time is displayed in 24-hour format.
5. Press the button after all fields are set.
• The date illustration shown is for the purpose of explanation and may differ from
the actual setting of your camera.
and turn your
a value, press
Set-up1 Set-up1 Set-up1
Format Format
Beeper Beeper Beeper
Date & Tim Date & Time
Language Language Langu
) to
the
Set : Set : Set :
Set-up2 Set-up2 Set-up2 Set-up3 Set-up3 Set-up3
Louder Louder Louder
te & Time m/d/y m/d/y m/d/y
English Englis En
Select : Select : Select :
Date & Tim Date & Time te & Time
01 01 01 / 01 / 2007 / 01 / 2007 / 01 / 2007
00 : 00 00 : 00 00 : 00
Select : Select : Select :
EN-21
lish