Olympus 225690 - Stylus 600 6MP Digital Camera Advanced Manual page 132

Troubleshooting
(When the camera is connected to a computer or printer
Possible cause
The printer fails to connect.
[PC] was selected on the
monitor after connecting
the camera to the printer
with the USB cable.
The printer does not
support PictBridge.
The camera is not recognized by the computer.
The computer failed to
recognize the camera.
The USB driver has not
been installed.
9
132
Corrective action
Remove the USB cable, and start again from
Step 1 of "Printing pictures".
Refer to the instruction manual for your
printer. Or, contact your printer manufacturer.
Disconnect the USB cable from the camera,
and connect it again.
Install OLYMPUS Master.
Ref.
page
P. 93,
95
–
P. 114
P. 110