PCI Adapters
The following procedures describe the removal, replacement, and installation of PCI adapters. Before
performing the following procedures, read the "Safety Notices" on page ix.
Notes:
1. Some PCI adapter cards are shipped from the manufacturer with a blue handle or support along the
back edge of the card. To use adapters of this type in this system, you must remove the blue handle or
support from the card.
2. If the PCI adapter dividers are removed, note their location so that they can be returned to the same
place in the system.
Decide which PCI slot you will use before you begin to install a new PCI adapter in your system. See the
RS/6000 & pSeries PCI Adapter Placement Reference, order number SA38-0538 for information about
using the PCI adapter slots in your system.
252
IntelliStation POWER 9114 Model 275 Service Guide