Viewing Mesh Statistics For A Mesh Access Point; Viewing Mesh Statistics For A Mesh Access Point (Gui) - Cisco Mesh Access Points Deployment Manual

Checking the Health of the Network

Viewing Mesh Statistics for a Mesh Access Point

This section describes how to use the controller GUI or CLI to view mesh statistics for specific mesh access
points.
You can modify the Statistics Timer interval setting on the All APs > Details page of the controller GUI.
Note

Viewing Mesh Statistics for a Mesh Access Point (GUI)

Step 1 Choose Wireless > Access Points > All APs to open the All APs page.
Step 2 To view statistics for a specific mesh access point, hover the mouse over the blue drop-down arrow for the desired mesh
access point and choose Statistics. The All APs > AP Name > Statistics page for the selected mesh access point appears.
This page shows the role of the mesh access point in the mesh network, the name of the bridge group to which the mesh
access point belongs, the backhaul interface on which the access point operates, and the number of the physical switch
port. It also displays a variety of mesh statistics for this mesh access point.
OL-27593-01
Viewing Mesh Statistics for a Mesh Access Point
Cisco Mesh Access Points, Design and Deployment Guide, Release 7.3
199