Monitoring Mesh Access Points Using Maps - Cisco Mesh Access Points Deployment Manual

Cisco mesh access points, design and deployment guide, release 7.3
Table of Contents

Advertisement

Monitoring Mesh Networks Using Maps
Note
The AP Mesh Info check box under the Layers drop-down list must be selected for links to appear on the
map.
Step 4
Click either Link Test, Child to Parent or Link Test, Parent to Child. After the link test is complete, a results page
appears.
A link test runs for 30
Note
seconds.
You cannot run link tests for both links (child-to-parent and parent-to-child) at the same
Note
time.
Step 5
To view a graphical representation of SNR statistics over a period of time, click the arrow on the link. A page with
multiple SNR graphs appears.
The following graphs are displayed for the link:
• SNR Up—Plots the RSSI values of the neighbor from the perspective of the mesh access point.
• SNR Down—Plots the RSSI values that the neighbor reports to the mesh access point.
• Link SNR—Plots a weighed and filtered measurement based on the SNR Up value.
• The Adjusted Link Metric —Plots the value used to determine the least cost path to the root mesh access
• The Unadjusted Link Metric —Plots the least cost path to get to the root access point unadjusted by the

Monitoring Mesh Access Points Using Maps

You can view the following summary information for a mesh access point from a mesh network map:
• Parent
• Number of children
• Hop count
• Role
• Group name
• Backhaul interface
• Data Rate
• Channel
Cisco Mesh Access Points, Design and Deployment Guide, Release 7.3
238
point. This value is the ease to get to the rooftop access point and accounts for the number of hops. The
lower the ease value, the less likely the path is used.
number of hops. The higher the value for the unadjusted link indicates the better the path.
This information is in addition to the information shown for all mesh access points
Note
(MAC address, mesh access point model, controller IP address, location, height of mesh
access point, mesh access point up time, and CAPWAP up time).
Managing Mesh Access Points with Cisco Prime Infrastructure
OL-27593-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents