Cisco Mesh Access Points Deployment Manual page 257

Managing Mesh Access Points with Cisco Prime Infrastructure
Column
Antenna Azim. Angle
Antenna Diversity
Antenna Elev. Angle
Antenna Gain
Antenna Mode
Antenna Name
Antenna Type
Audit Status
Bridge Group Name
CDP Neighbors
Channel Control
Channel Number
Controller Port
Node Hops
OL-27593-01
Options
Indicates the horizontal angle of the antenna.
Indicates if antenna diversity is enabled or disabled. Antenna diversity
refers to the access point sampling the radio signal from two integrated
antenna ports in order to choose the preferred antenna.
Indicates the elevation angle of the antenna.
Indicates the peak gain of the dBi of the antenna for directional antennas
and the average gain in dBi for omnidirectional antennas connected to
the wireless network adapter. The gain is in multiples of 0.5 dBm. An
integer value 4 means 4 x 0.5 - 2 dBm of gain.
Indicates the antenna mode such as omni, directional, or nonapplicable.
Indicates the antenna name or type.
Indicates whether the antenna is internal or external.
Indicates one of the following audit statuses:
• Mismatch—Config differences were found between Cisco Prime
Infrastructure and controller during the last audit.
• Identical—No config differences were found during the last audit.
• Not Available—Audit status is unavailable.
Indicates the name of the bridge group used to group the access points,
if applicable.
Indicates all directly connected Cisco devices.
Indicates whether the channel control is automatic or custom.
Indicates the channel on which the Cisco radio is broadcasting.
Indicates the number of controller ports.
Indicates the number of hops between access point.
Cisco Mesh Access Points, Design and Deployment Guide, Release 7.3
Monitoring Mesh Health
241