Marker - Panasonic BT-LH1710 - Professional - LCD Production Monitor Operating Instructions Manual

Main Menu
(continued)

MARKER

Sub menu
MARKER
*2*3
16:9
*2*4
4:3
*2
BACK
*2
CENTER
*5
GPI PRESET1
*5
GPI PRESET2
*6
MARKER TYPE
CROSS HATCH
*1 This setting is turned "ON" when receiving marker control in REMOTE operation. (GPI, if set, has priority.)
*2 These settings are disabled when the GPI function (
They are also disabled in split screen mode.
*3 This setting is enabled only for HD and SD signal input in 16:9 aspect ratio mode.
*4 This setting is enabled for SD signal input in 4:3 aspect ratio mode.
*5 Remote control via RS-232C ends in error (error response: ER001) when "GPI PRESET1" or "GPI PRESET2"
is selected with the GPI function.
*6 Display size for SD signals differ.
TYPE1: The effective horizontal area meets the SMPTE125M for NTSC and ITU-R BT 601-5 for PAL.
TYPE2: The effective horizontal area meets the EIA-RS170 for NTSC and ITU-R BT 470-4 for PAL.
18
Setting Description
*1
OFF Enables the MARKER setting.
ON
OFF Selects and displays marker type for 16:9 aspect ratio.
4:3 <OFF>
13:9 <4:3>
14:9 <14:9>
CNSCO <VISTA> VISTA marker
VISTA <90%>
95% <93%>
93%
90% <88%>
88%
80%
OFF Selects and displays marker type for 4:3 aspect ratio.
95% <OFF>
93% <95%>
90% <90%>
88% <88%>
80%
NORMAL Selects the background brightness around the marker.
HALF <NORMAL>
BLACK <HALF>
<BLACK>
OFF Displays the center marker.
ON <OFF>
<ON>
4:3 GPI PRESET1: Selects the marker displayed by the GPI terminal
13:9 "MARKER1 ON/OFF" (
14:9 GPI PRESET2: Selects the marker displayed by the GPI terminal
CNSCO "MARKER2 ON/OFF" (
VISTA <4:3>
95% (16:9) <13:9>
93% (16:9) <14:9>
90% (16:9) <CNSCO>
88% (16:9) <VISTA>
80% (16:9) <95% (16:9)> 95% area marker for 16:9 aspect ratio
95% (4:3) <93% (16:9)> 93% area marker for 16:9 aspect ratio
93% (4:3) <90% (16:9)> 90% area marker for 16:9 aspect ratio
90% (4:3) <88% (16:9)> 88% area marker for 16:9 aspect ratio
88% (4:3) <80% (16:9)> 80% area marker for 16:9 aspect ratio
80% (4:3) <95% (4:3)> 95% area marker for 4:3 aspect ratio
<93% (4:3)> 93% area marker for 4:3 aspect ratio
<90% (4:3)> 90% area marker for 4:3 aspect ratio
<88% (4:3)> 88% area marker for 4:3 aspect ratio
<80% (4:3)> 80% area marker for 4:3 aspect ratio
TYPE1 Selects conventional monitor or camera recorder marker size.
TYPE2 <TYPE1>
<TYPE2>
HIGH Turns the cross hatch grid on and off and sets its density.
LOW <HIGH>
OFF <LOW>
<OFF>
Underlined values indicate factory defaults.
No marker display
4:3 marker
14:9 marker
90% area marker
93.1% area marker (TYPE1)
93% area marker (TYPE2)
89.5% area marker (TYPE1)
88% area marker (TYPE2)
No marker display
95% area marker
90% area marker
89% area marker (TYPE1)
88% area marker (TYPE2)
Normal background
50% background brightness
0% background brightness (black)
Turns the display off
Turns the display on
page 36) operation.
page 36) operation.
4:3 marker
13:9 marker
14:9 marker
CNSCO marker
VISTA marker
Conventional monitor marker size
Marker size compliant with the camera recorder (Panasonic)
70/256 (displays a dense cross hatch grid)
20/256 (displays a light cross hatch grid)
Turns the display off
page 36) is used to control the marker setting.
<13:9> 13:9 marker
<CNSCO> CNSCO marker
<95%> 95% area marker
<80%> 80% area marker
<93%> 93% area marker
<80%> 80% area marker