Recalling The Equalizer Curves; 13-Band Graphic Equalizer Adjustment - Pioneer FH-P8800 Operation Manual

Using the Digital Signal Processor (DSP)

Recalling the Equalizer Curves

You can easily recall equalizer curves.
1. Press the DSP button and select the Graphic Equalizer mode (50Hz) in the
DSP Menu.
2. Select the desired equalizer
curve with one of the buttons
from 1 to 3. (e.g. Press button
2.)
Note:
• When you have performed Auto-equalizing (refer to page 41), you can turn AUTO EQ ON and
OFF by pressing the button for the equalizer curve that was called.
Button
1
2
3

13-Band Graphic Equalizer Adjustment

The user curves (User 1, 2) let you make fine adjustments to equalizer curve frequency
levels. Adjustments are automatically memorized.
1. Press the DSP button and select the Graphic Equalizer mode (50Hz) in the
DSP Menu.
2. Recall User curve (User 1 or 2). (Refer to previous section.)
3. Select the band to be adjusted
with the 2/3 buttons.
50 Ô 80 Ô 125 Ô 200 Ô 315
Ô 500 Ô 800 Ô 1.3 k Ô 2 k
Ô 3.2 k Ô 5 k Ô 8 k Ô 12.5 k (Hz)
4. Adjust the level with the 5/∞
buttons.
The display shows "+6" – "–6".
39
Display
USER 1
USER 2
FLAT
"USER 2"
Equalizer Curve
User 1
User 2
Flat