Basic Operation; To Listen To Music - Pioneer FH-P8800 Operation Manual

Basic Operation

To Listen to Music

The following explains the initial operations required before you can listen to music.
Note:
• Loading a disc in this product. (Refer to page 12.)
• Loading a cassette tape in this product. (Refer to page 13.)
1. Select the desired source (e.g. Tuner).
Each press changes the Source ...
7 Head Unit
Each press of the SOURCE button selects the desired source in the following order:
Built-in CD player = Tuner = Cassette player = Multi-CD player =
External Unit = AUX
7 Remote Controller
Each press of the button selects the desired source in the following order:
CD button
Cassette button : Cassette player = AUX = Sources OFF
TUNER button : Tuner = Sources OFF
Note:
• External Unit refers to a Pioneer product (such as one available in the future) that, although incom-
patible as a source, enables control of basic functions by this product. Only one External Unit can
be controlled by this product.
• In the following cases, the sound source will not change:
* When this product corresponding to each source is not connected to this product.
* No disc is set in this product.
* No tape is set in this product.
* No magazine is set in the Multi-CD player.
* AUX (external input) is set to OFF. (Refer to page 47.)
• When this product's blue lead is connected to the car's Auto-antenna relay control terminal, the
car's Auto-antenna extends when this product's source is selected the tuner. To retract the antenna,
switch the sources other than tuner.
9
: Built-in CD player = Multi-CD player = Sources OFF