Advertisement
DEVICE SELECT
Selects the current slot.
A return command is returned only if Sense [FF] is specified.
Command
7F
Category Code
01
Machine ID
0
Parameter
2 bytes
Data 3
Data 4
0
0
0
1
F
F
・ If data other than the above is received, the connected device will transmit ILLEGAL [F2].
Return
DEVICE SELECT RETURN [FF01]
DIRECT FOLDER SEARCH PRESET
Moves to a folder by specifying the project number and the folder number.
After moving, the controlled device will maintain the state in which it was when the operation began.
Data 9 to 12 (project number) can be omitted. In that case, the controlled device will move from the current
folder to the specified folder within the current project.
If "0000" is specified for Data 5 to 8 (folder number), this command is treated as the command "PROJECT
SELECT" (to be explained later).
Command
7F
Category Code
02
Sub Command
23
Machine ID
0
Data
4 bytes or 8 bytes
Data 5
Data 6
Data 7
Data 8
[If the data length is 8 bytes, the following data will be added.]
Data 9
Data 10
Data 11
Data 12
・ If a folder number not existing in the project is specified, the connected device will transmit ILLEGAL [F2].
・ If the current folder number is specified for the folder number, the connected device will transmit ILLEGAL
[F2].
Return
none
Description
SLOT 1
SLOT 2
Sense
Description
Tens digit of the folder number
Ones digit of the folder number
Thousands digit of the folder number
Hundreds digit of the folder number
Description
Tens digit of the project number
Ones digit of the project number
Thousands digit of the project number
Hundreds digit of the project number
TASCAM HS-8 RS-232C Protocol Specification
Remarks
Selects SLOT 1 as the current slot.
Selects SLOT 2 as the current slot.
Requests that the current slot be returned.
Remarks
Folder number
Example) 2301: folder 123
Remarks
Project number
Example) 5400: project 54
24
TEAC Corporation
Advertisement
