Advertisement
ILLEGAL STATUS
This command is returned when an invalid command or data is sent to the controlled device.
If this command is transmitted from the controlled device, the external controller device should re-transmit the
command or data that meets the specifications.
Command
F2
Machine ID
0
Data
none
Request/Preset
none
POWER ON STATUS
This command indicates that the controlled device has been turned on.
Command
F4
Machine ID
0
Data
none
Request/Preset
none
CHANGE STATUS
This command indicates that the operation or mode of the controlled device has changed.
Command
F6
Machine ID
0
Data
2 bytes
Data 1
Data 2
0
0
0
3
1
0
Request/Preset
none
VENDER COMMAND RETURN
This is the returned command in response to the command [7F]. See "Detailed Information about Vender
Commands" on page 24 and following.
Description
Changed Mechanical Status
Changed Track
Changed Online Status
TASCAM HS-8 RS-232C Protocol Specification
Remarks
The operation status has changed.
The take number has changed.
The online status has changed.
22
TEAC Corporation
Advertisement
