Advertisement
JOG
Controls Jog Playback mode for the controlled device. This command also performs jog operation.
Command
15
Machine ID
0
Data
2 bytes
Data 1
Data 2
0
0
0
1
1
0
1
1
・ If data other than the above is received, the HS-8 will transmit ILLEGAL [F2].
Return
none
SHUTTLE
Places the controlled device into shuttle playback state.
The shuttle playback state will continue until a command such as STOP, PLAY or PAUSE is received.
Command
16
Machine ID
0
Data
2 bytes
Data 1
Data 2
0
0
0
1
・ If data other than the above is received, the HS-8 will transmit ILLEGAL [F2].
Return
none
FLASH LOAD
Performs flash load operation on the controlled device.
Command
17
Machine ID
0
Data
none
Return
FLASH LOAD ACKNOWLEDGE [97]
FLASH START
Causes the controlled device to flash-start the specified take.
If the take specified is not flash-loaded, a normal playback will be performed.
Command
19
Machine ID
0
Data
4 bytes
Data 1
Data 2
Data 3
Data 4
・ If data other than the above is received, the HS-8 will transmit ILLEGAL [F2].
Return
none
Description
Remarks
Jog Off
Turns off Jog Playback mode.
Jog On
Turns on Jog Playback mode.
Jog +
Moves the playback position in the forward direction.
Jog -
Moves the playback position in the backward direction.
Description
Remarks
Shuttle Forward
Shuttles in the forward direction.
Shuttle Reverse
Shuttles in the backward direction.
Description
Tens digit of the take number
Ones digit of the take number
Thousands digit of the take number
Hundreds digit of the take number
TASCAM HS-8 RS-232C Protocol Specification
Remarks
Take number
Example) 1400: take 14
9
TEAC Corporation
Advertisement
