Playback; Adjusting Playback Volume; Setting The Playback Area (Area) - Tascam DR-40 Owner's Manual

6 – Playback
On the Home Screen, you can use the . and / buttons
to select the playback file. The files that you can select are
determined by the playback area setting.
Limiting the playback area makes file selection easier when
you have numerous recorded and copied files on the SD card.
On the Screen, you can select all files, the
PLAY SETTING
current folder or the playlist as the playback area. You can also
use the Screen to set a folder as the playback area.
BROWSE
TIP
On the Screen, regardless of the playback area setting,
BROWSE
you can select any file on the card that you want.

Adjusting playback volume

The volume of output through the built-in speaker or the
/LINE OUT connector can be adjusted using the + or −
button while the Home Screen is shown.
A pull-up volume indicator appears.
74
TASCAM DR-40

Setting the playback area (AREA)

Set the playback area for repeat and ordinary playback on the
screen.
PLAY SETTING
1 Press the MENU button to open the
2 Use the + or − button to select
the ENTER/MARK or / button.
3 Use the + or − button to select (highlight) AREA, and
press the ENTER/MARK or / button.
4 Use the + or − button to set the playback area.
ALL FILES
Set the playback area as all files in the Music Folder on the
SD card.
Screen.
MENU
and press
PLAY SETTING