Changing The Speed Of Playback (Vsa Playback) - Tascam DR-100MKIII Reference Manual

6. Press the ENTER/MARK button again to clear the IN
(starting) and OUT (ending) points.
NOTE
• When in loop playback mode, the mark function is disabled.
• If neither IN or OUT points are set, the entire file will be
played repeatedly from start to finish in single track loop
playback mode.
• You cannot set the IN and OUT points in different files.
• If you select a different file, the IN and OUT point settings
will be cleared.
Changing the speed of playback (VSA
playback)
The unit features a VSA (Variable Speed Audition) playback
function that changes the playback speed without changing the
pitch.
CAUTION
The VSA function cannot be used with files recorded
with sampling frequencies of 88.2, 96, 176.4 or 192 kHz.
However, the playback speed can still be changed in these
cases.
1. Press the Fn button to open the FUNCTION screen, and select
the VSA PLAY item. (See "Basic menu operation procedures"
on page 10.)
2. Press the ENTER/MARK button to open the VSA PLAY
screen.
3. Use the VSA item to turn the VSA function on.
Options: OFF (default), ON
4. Use the SPEED item to set the playback speed.
Options: ×0.5 – ×2.0 (in ×0.1 increments, ×1.0 default)
5 – Playback
31
TASCAM DR-100MKIII