NETGEAR WAG102NA Reference Manual page 39

NETGEAR ProSafe 802.11g Wireless Access Point WG102 Reference Manual
3. Set the Network Authentication that you want to use.
Figure 2-4
a. On the Security menu, click Security Profiles Settings.
b. Select the profile that you want.
c. Click Edit to view the Security Profiles Configuration menu.
d. Choose the type of Network Authentication that you want from the list.
Note: WEP can be used with Open System or Shared Key. Choose the
e. Click Apply to save your settings.
Note: If you use a wireless computer to configure WEP settings, you will be
Configuring Security
encryption strength, and then enter the Keys as explained in
WEP Data Encryption Keys" on page 2-10
disconnected when you click Apply. Reconfigure your wireless adapter to
match the new settings or access the wireless access point from a wired
computer to make any further changes.
v1.0, July 2008
"Entering
2-9