Connect the Router using Wireless LAN
xD SL Mo dem
W A
N p
o r t
Wir elessB roadb and R outer
1.
Plug in one end of the RJ45 network cable to the Cable/DSL
Modem.
2.
Plug in the other end of the RJ45 network cable to the Wireless
Internet Broadband Router WAN port.
Check the installation
The control LEDs of the Wireless Internet Broadband Router are clearly
visible and the status of the network link can be seen instantly:
1.
With the power source on, once the device is connected to the
broadband modem, the Power, CPU, LAN, WLAN and WAN port
link LEDs of the Internet Broadband Router will light up indicating a
normal status.
2.
While the WAN is link up to the Cable/DSL modem, the WAN
port's Link/ACT LED will light up.
3.
While the LAN is link up to the computer system, the LAN port's
Link/ACT LED will light up.
N otebo ok
P C
No teboo k
Wireless LAN Networking
8