Rip - 3Com 3CRWE554G72T - OfficeConnect Wireless 11g Cable/DSL Router User Manual

92 C 5: R
HAPTER OUTER

RIP

C
ONFIGURATION
Gateway - the gateway used to route data to the network specified by
■
the network address.
The Router supports the Routing Information Protocol (RIP). RIP allows
you to set up routing information on one RIP enabled device, and have
that routing information replicated to all RIP enabled devices on the
network. LAN and WAN interfaces can be configured independently of
each other.
Select the RIP tab to display the screen shown in
Figure 71 RIP screen
Setting Up RIP
Check the Enable Auto Summary check box if you want the Router to
send simplified routing data to other RIP devices, instead of full routing
data.
Figure 71