Table of Contents
Advertisement
Wireless Settings
Figure 34 DHCP Fixed Mapping Setup Screen
You only need to create Fixed Mappings for devices that need a specific IP
address. For devices that do not need a specific IP address, the Router will
automatically allocate addresses.
To add a Fixed Mapping:
1 Enter the IP Address that you want to reserve in the IP Address for client
box.
2 Enter the MAC Address for which you want to create a Fixed Mapping in
the MAC Address of client box.
The MAC Address must be entered as 6 hexadecimal pairs, for example
12-34-56-78-90-ab.
3 Click Apply to add the Fixed Mapping, or Close to close the window
without adding the Fixed Mapping.
The Fixed DHCP Mapping will be displayed in the DHCP Clients list as a
Fixed Association.
The Wireless Settings menu provides options described in the following
sections.
To improve the security of your wireless network, 3Com recommends
that you:
1. Change the SSID from its default value - see
2. Enable Encryption - see
3. Enable Connection Control - see
page 54
page 60
Wireless Settings
page 53
51
Hide quick links:
Advertisement
Table of Contents
