L2TP Mode
Figure 23 L2TP Mode Screen
To set up the Router for use with an L2TP connection, use the following
procedure:
1 Enter your L2TP server address in the L2TP Server Address text box.
2 Enter your L2TP user name in the L2TP User Name text box.
3 Enter your L2TP password in the L2TP Password text box.
4 Enter your Primary DNS Address and Secondary DNS address.
Your ISP may provide you with primary and secondary DNS addresses.
they have been provided, enter the addresses in the appropriate text
boxes. If not, leave 0.0.0.0 in the boxes.
5 Enter the value supplied by your ISP in the MTU text box. If your ISP has
not supplied an MTU value, leave this at the default value. The default is
1440.
6 Select an idle time from the Maximum Idle Time drop-down list. This is
the amount of time without Internet activity that you want to allow
before the Router ends the L2TP session.
Accessing the Wizard
39