Battery Installation; Battery Notice - VTech Discovery Playground User Manual

BATTERY INSTALLATION

1. Make sure the unit is turned off.
2. Locate the battery cover on the
bottom of the main unit. Use a
screwdriver to loosen the screw.
3. Install 4 new "C" (UM-2/LR14)
batteries following the diagram inside
the battery box. (The use of new
alkaline batteries is recommended for
maximum performance.)
4. Replace the battery cover and tighten the screw to secure the battery cover.

BATTERY NOTICE

• Install batteries correctly observing the polarity ( +, - ) signs to avoid
leakage.
• Do not mix old and new batteries.
• Do not use batteries of different types.
• Remove batteries from the equipment when the unit will not be used
for an extended period of time.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
• Only batteries of the same and equivalent type as recommended are
to be used.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE
BATTERIES.
4