VTech Discovery Playground User Manual page 6

3. Attach the HANGING MONKEY to
the RIGHT RAIL.
4. Insert the RIGHT RAIL into the slots
of the RIGHT BASE. Tighten the two
BIG SCREWS at both ends of the
base. Repeat the same procedure for
the LEFT RAIL. Please check that
the rails are securely fastened to the
base to ensure safety while the baby
is playing.
5. Place the MAIN UNIT on a flat floor.
Attach the assembled RIGHT RAIL
and BASE to the side of the BLUE
DRUM. Repeat the same procedure
for the LEFT RAIL and BASE.
To make the assembly process
easier, please position the tip of the
hook into the hole first, and then push
the whole unit in gently. Pull the
LOCK behind the drum towards the
RAIL to securely fasten the rail to the
main unit.
6