Table of Contents
Advertisement
GETTING STARTED
Battery Removal and Installation
1. Make sure the unit is turned OFF.
2. Find the battery cover located on the back of the unit, use a
screwdriver to loosen the screw and then open the battery cover.
3. Remove old batteries by pulling up on one end of
each battery.
4. Install 2 new AA (AM-3/LR6) batteries following
the diagram inside the battery box. (For best
performance, alkaline batteries or fully charged
Ni-MH rechargeable batteries are recommended).
5. Replace the battery cover and tighten the screw
to secure.
ASSEMBLY INSTRUCTIONS
With Bluey's Keytar, safety comes first. Adult assembly required.
For your child's safety, do not let them play with this toy until it is fully
assembled.
Bluey's Keytar comes with an optional keytar strap that can be
attached or removed at any time. Follow the steps below to attach
your keytar strap.
Turn over the keytar. Insert one of the keytar straps through the slot
on the right and the other through the slot on the left as shown.
4
Advertisement
Table of Contents
