Deleting data
Deletes the data during creating and displaying.
Command to be used
1.
2.
1.
Deleting a part of data
C
C
Move the needle to the desired position.
Input the command.
Input
to delete data after the current needle position.
C
Input
to delete data before the current needle position.
C
Input the stitch count in
Deleting program data
Press
2
2
2
An alarm sound is issued and input data is deleted.
Deletes data after
If this command is used at the sewing start position, the
sewing start position is deleted and the current needle position
becomes the sewing start position.
Deletes data before
If this command is used at the sewing end position, the end
code is deleted.
.
.
R
Programmer
Chapter 3 Programming with Command Function
stitches.
stitches.
191