Brother BAS-311E Instruction Manual page 150

Programming a new point.
1. Press .
F
2. Move the work clamp with
the needle point is at 1' of the pattern.
Record the coordinates (values of
3. Press .
L
1' is programmed.
4. Move the work clamp with
opposite position of coordinates recorded
in step 2 and press
If the moving distance is long, press
5. Press .
R
The work clamp returns to the home position.
Deleting 1
1. Press and press
1
The needle point returns to the first stitch.
2. Press .
C
3. Input the number of stitches to be deleted
and press .
The example is deleting 1 stitch. Press
4. The needle point moves to 1'.
Saving
1. Specify the program number on the
operation panel and press the read/write
switch for writing into the floppy disk.
Ending program
1. Press .
P
so that
and ).
to the
.
L
.
LI LI
.
.
1
Programmer
Chaprter 3 Programming with Command Function
149