Chapter 2 Programming with Help Function
1.
2.
3.
4.
104
Creating a multiple stitch
Select
and press
Input the stitch length and the number of lines for a multiple stitch. Press
.
Move the needle point with
When the embroidering direction should be changed, provide a split by pressing
Press
F
and move the needle point from the inside line to the outside line (reversely).
valid after input of a split.
When programming, be sure that the points and splits specified on the inside line are paired with those on
the outside line respectively.
When the needle point has reached the end point, press
A buzzer sounds. Calculation is performed based on the input data. A buzzer stops on completion of
programming.
Start
Press
twice.
.
and press
Press
Press
twice.
Press
twice.
Programmer
.
twice.
F
three times.
twice.
End
Press
three times.
Press
twice.
Press
.
F
becomes