Epson EMP 9000 - SXGA LCD Projector Owner's Manual page 76

Menu item Description
Color Adjusts the color balance (Red:Green:Blue) of the
input source.
Select this item by pressing the Enter button. The
projector will enter color adjustment mode. Use the
Enter button (remote) or the up and down buttons
(operation panel) to select a color.
Next, use the Enter button (remote) or left and right
buttons (operation panel) to adjust the selected color.
Increase the color setting for more intense color, or
lower the setting for less intense color. When you
finish making adjustment, press the Esc button to
return to the Video submenu.
Sharpness Adjusts the screen sharpness.
Increase the sharpness for more sharp the image, or
decrease it for less sharp the image.
Resolution Specifies the video signal system.
The initial setting is the 640 x 480. Press either right or
left key button to choose a proper resolution.
Preset The current settings for the computer input signal are
saved and recalled for the next use.
User can save the preset up to five settings.
The following settings are saved: Resolution,
Tracking, Sync Signal, Position.
Reset Returns all menu items to their initial factory defaults.
Select this item and then press the Enter button to
display the confirmation screen.
Next, select Yes and then press the Enter button to
reset the menu.
If you change your mind, select No and then press the
Enter button to clear the confirmation screen without
changing any settings.
Menu Options 55