Connecting The Mouse And Serial Cables - Epson EMP 9000 - SXGA LCD Projector Owner's Manual

Connecting the Mouse and Serial Cables

If you want to use the remote control as a mouse or use the
ELP Link IV software, you need to connect the main cable. It
provides connectors for:
• The PS/2 mouse cable or USB mouse cable (to use the
remote control as a mouse)
• The serial cable (to use the ELP Link IV software and the
Effects buttons on the remote control)
Refer to this illustration while following the steps below.
Mouse/Com 1 port
1. Connect the small end of the main cable to the projector's
Mouse/Com 1 port. (Use the Mouse/Com 2 port if you
are connecting a second computer.)
9-pin serial cable
main cable
Connecting to a Computer
PS/2 mouse cable
(or USB mouse cable)
9