Epson EMP 9000 - SXGA LCD Projector Owner's Manual page 34

Refer to this illustration while following the steps below.
Mouse/Com 1
port
1. Connect the small end of the main cable to the projector's
Mouse/Com 1 port. (Use the Mouse/Com 2 port if you
are connecting a second computer.)
2. To use the remote control as a wireless mouse, connect
the 9-pin end of the PS/2 mouse cable or USB mouse
cable included with the projector to the MOUSE terminal
on the square end of the main cable.
3. Connect the 6-pin (mini-DIN) end of the PS/2 mouse
cable to the external mouse port on your laptop.
9-pin serial
cable
main cable
Connecting to a Computer
PS/2 mouse cable
(or USB mouse
cable)
13