Epson EMP 9000 - SXGA LCD Projector Owner's Manual page 37

Connecting the Video and Monitor Cables
First connect the video and monitor cables. Refer to this
illustration as you follow the steps below.
1. Connect one end of the computer cable to the projector's
Computer 1 port. (Use the Computer 2 port if you are
connecting a second computer.)
♦
Note: If your computer output is a 5BNC type, use the computer
cable (5BNC).
16
Computer Out port
Macintosh
monitor adapter
Macintosh
desktop adapter
Computer 1 port
computer
cable
Macintosh
monitor cable