Brother HL-5470DW User Manual page 94

General Information
Network Menu (continued)
Submenu 1 Submenu 2
WLAN WLAN Status
(Continued) (Appears only
when WLAN
Enable is On
and Wired
Enable is
Off.)
MAC Address -
Set to Default Restores wireless network settings of the internal print server to the factory default.
WLAN Enable -
Wi-Fi Direct Push Button -
PIN Code
Manual
Group Owner -
Device Info. Device Name
The factory settings are shown in Bold with an asterisk.
Menu Selections Options
Active(11n) /
Status
Active(11b) /
Active(11g) /
Wired LAN Active /
WLAN OFF / AOSS Active /
Connection Fail
Strong / Medium / Weak /
Signal
None
-
Channel
-
Speed
-
SSID
Ad-hoc* /
Comm. Mode
Infrastructure
-
On / Off*
-
- -
- -
On / Off*
-
-
SSID
-
IP Address
Descriptions
Shows wireless Ethernet link
status.
Shows the signal condition.
Shows the channel in use when
Status is Active.
Shows the connecting speed
when Status is Active.
Shows SSID [uses a maximum
of 32 digits and characters 0-9,
a-z and A-Z in ASCII values]
Shows the current
Communication Mode.
Shows MAC address of the
machine.
Turns the wireless interface on
or off.
You can easily configure your
Wi-Fi Direct™ network settings
using the one-button push
method.
You can easily configure your
Wi-Fi Direct™ network settings
using WPS with a PIN code.
You can manually configure
your Wi-Fi Direct™ network
settings.
Sets your machine as the Group
Owner.
You can see the device name of
your machine.
Shows SSID of Group Owner.
When the machine is not
connected, the LCD shows
Not Connected.
You can see the current IP
Address of your machine.
3
88