Brother HL-5470DW User Manual page 93

General Information
Network Menu (continued)
Submenu 1 Submenu 2
WLAN TCP/IP
Setup Wizard -
WPS/AOSS
WPS w/PIN Code -
The factory settings are shown in Bold with an asterisk.
Menu Selections Options
Auto* / Static / RARP /
Boot Method
BOOTP / DHCP
IP Address ###.###.###.###
(000.000.000.000)*
Subnet Mask ###.###.###.###
(000.000.000.000)*
Gateway ###.###.###.###
(000.000.000.000)*
0 / 1 / 2 / 3* / ... / 32767
IP Boot Tries
On* / Off
APIPA
On / Off*
IPv6
-
- -
-
Descriptions
Chooses the IP method that best
suits your needs.
Enter the IP address.
1
Enter the Subnet mask.
1
Enter the Gateway address.
1
Specifies the number of
attempts the machine will try to
obtain an IP address when the
Boot Method is set to any
setting except Static.
Automatically allocates the IP
address from the link-local
1
address range.
Enables or Disables the IPv6
protocol.
Configures the wireless network
settings using the setup wizard.
Configures the wireless network
settings using WPS or AOSS™
method.
Configures the wireless network
settings using WPS with a PIN
code.
3
87