Table of Contents
Advertisement
Stream Punch
2.3.1
Punching File Holes in Copies
Copies will be punched in this mode. Follow the procedure below to select
the paper size 8.5" × 11" v and punch position. To select the punch hole
type, change the die set to the desired one.
!
Detail
For detailed specifications of Stream Punch GP-501, see page 21.
Prerequisites
0 Available paper size is 8.5" × 11" v only. Do not use 8.5" × 11" w.
0 A power switch is provided on the stream punch. Be sure to turn it on be-
fore turning on the main and sub power switches of the main body.
0 The die set model currently mounted on the stream punch cannot be
checked from the control panel. If required, open the front door of the
stream punch to check it before the operation.
1
Position the original.
2
Touch [Punch] on the Copy Screen.
The Output Application icon shows the punch position currently select-
ed. If you want to change the punch position, proceed to the following
steps.
3
Touch [Output Appli.] on the Copy Screen.
The Output Application Screen will be displayed.
bizhub PRO C6501 Additional Information
2
11
Advertisement
Table of Contents
