Setting Image Quality And Toner Saving - Konica Minolta bizhub PRO 950 User Manual

Basic Printing and Common Printing Functions
5.2.9

Setting image quality and toner saving

To set print and image quality, open the Screen panel of the printer driver
Plug-in.
In this panel you can set the [Screen Frequency], (measured in lines per
inch, lpi). Higher values at screen frequency yield a finer raster, but allow
less grey levels to be distinguished.
[Screen Angle] allows to adjust the angle (measured in degrees,°) in which
the raster lines are applied against a virtual horizontal line. In general, you
don't need to change the default setting.
[Print Quality] can reduce the amount of used toner in two steps for e.g.
previews of documents to print.
For detailed information about image and print quality see section 6.3.9
"Screen".
bizhub PRO 950 Printer Driver
5-13