7
–
Press the [Edit] key on the destination list screen to change what to
include in a Group.
–
Pressing [List] key after "registered group name" is selected does
not allow you to edit the destination list displayed.
4
Press the [Scanning Mode Set] key.
The Scanning Mode Set screen appears.
5
Configure the necessary items.
–
For more information on the configurations on the Scanning Mode
Set screen, refer to "About the Scanning Mode Set Screen" on
Page 7-29.
6
Set an original and press the [Start] button.
–
The original is scanned, and the scanned data are sent to an spec-
ified destination.
–
When the Reserved Job screen is displayed, the next job scan can
be set to be scanned.
7-28
Using the Network Scanner Features
bizhub PRO 1200/1051 Scanner