Using the Network Scanner Features
–
To deselect the Name, press the selected Name again.
–
If boxes are not registered, refer to "When a Box is Not Registered"
on page 7-12.
4
Press the [Scanning Mode Set] key.
The Scanning Mode Set screen appears.
5
Configure the necessary items.
–
For more information on the configurations on the Scanning Mode
Set, refer to "About the Scanning Mode Set Screen" on Page 7-29.
6
Set an original and press the [Start] button.
–
When the Reserved Job screen is displayed, the next job scan can
be set to be scanned.
The original is scanned, and the scanned data are stored in an speci-
fied destination.
bizhub PRO 1200/1051 Scanner
7
7-11