Advertisement
To specify a remote host or network to be allowed access to the IPSec tunnel, complete the following
steps:
1. Click IP Address.
2. Specify whether the interface is inside or outside by choosing one location from the Interface
drop-down menu.
3. Enter the IP address and mask.
4. Click Add.
5. Repeat step 1 through step 5 for each host or network that you want to have access to the tunnel.
6. Click the Next button to continue.
When configuring PIX 2, ensure that the values are correctly entered. The remote network
Note
for PIX 1 is the local network for PIX 2, and the reverse.
25
Advertisement
