Advertisement
5. Enter the IP address of the inside client. In this scenario, the IP address is 10.10.10.10.
6. Choose 255.255.255.255 from the Mask drop-down menu.
7. Choose the DMZ interface from the Translate Address on Interface drop-down menu.
8. Click the Dynamic radio button in the Translate Address To to section.
9. Choose 200 from the Address Pools drop-down menu for the appropriate Pool ID.
10. Click the OK
button.
11. A pop-up window displays asking if you want to proceed. Click the Proceed
12. On the NAT Translation Rules page, verify that the displayed configuration is accurate.
13. Click the Apply
The configuration should display as follows:
14
button to complete the configuration changes.
button.
Advertisement
