Cisco PIX-515-RPS - PIX 515-R - Firewall Quick Start Manual page 23

Step 4: Configure IPSec Encryption and Authentication parameters
1. Choose the Encryption algorithm (DES/3DES/AES) and Authentication algorithm (MD5/SHA).
2. Click the Next button to continue.
Step 5: Specify Local Hosts and Networks
Identify hosts and networks at the local site to be allowed to use this IPSec tunnel to communicate with
the remote-site peers. (The remote-site peers will be specified in a later step.)
Add or remove hosts and networks dynamically from the Selected panel by clicking on the >> or <<
buttons respectively. In the current scenario, traffic from Network A (10.10.10.0) is encrypted by
SA 1 and transmitted through the VPN tunnel.
23