Advertisement
6. In the Add Global Pool Item window:
a. Choose dmz from the Interface drop-down menu.
b. Click the Range radio button to enter the IP address range.
c. Enter the range of IP addresses for the DMZ interface. In this scenario, the range is
30.30.30.50 to 30.30.30.60.
d. Enter a unique Pool ID. (For this scenario, the Pool ID is 200.)
e. Click the OK button to go back to the Manage Global Address Pools window.
You can also choose Port Address Translation (PAT) or Port Address Translation
Note
(PAT) using the IP address of the interface if there are limited IP addresses available
for the DMZ interface.
7. In the Manage Global Address Pools window:
a. Choose the outside interface.
b. Click the Add button.
The Add Global Pool Item window appears.
11
Advertisement
