Flash Memory Card; Hard Disk With Adapter; Internal Solutions Port; Internal Print Server - Lexmark 734de - X Color Laser User Manual

Trays / Drawers
M
AKE SURE THE PAPER IS LOADED CORRECTLY
1
Open the paper tray.
2
Check for paper jams or misfeeds.
3
Make sure the paper tray closes properly.
R
ESET THE PRINTER
Turn the printer off. Wait 10 seconds. Turn the printer back on.

Flash memory card

Make sure the flash memory card is securely connected to the printer system board.

Hard disk with adapter

Make sure the hard disk is securely connected to the printer system board.

Internal Solutions Port

If the Lexmark Internal Solutions Port (ISP) does not operate correctly, then these are possible solutions. Try one or
more of the following:
C ISP
HECK THE CONNECTIONS
•
Make sure the ISP is securely attached to the printer system board.
•
Make sure the cable is securely connected to the correct connector.
C
HECK THE CABLE
Make sure you are using the correct cable and that it is securely connected.
M
AKE SURE THE NETWORK SOFTWARE IS CONFIGURED CORRECTLY
For information about installing software for network printing, see the Networking Guide on the Software and
Documentation CD

Internal print server

If the internal print server does not operate correctly, these are possible solutions. Try one or more of the following:
C
HECK THE PRINT SERVER CONNECTIONS
•
Make sure the internal print server is attached securely to the printer system board.
•
Make sure you are using the correct (optional) cable and that it is securely connected.
Troubleshooting
293