Pc Print Features - Panasonic KXFLB881 - Network Multifunction Laser Printer Operating Instructions Manual

9. Programmable Features

9.5 PC print features

Feature/Code
Setting the input tray in PCL
{#}{7}{6}{0}
Setting the output tray in PCL
{#}{7}{6}{1}
Setting the number of copies
in PCL
{#}{7}{6}{2}
Setting the recording paper
size in PCL
{#}{7}{6}{3}
Setting the image reduction
feature in PCL
{#}{7}{6}{4}
Setting the recording paper
direction in PCL
{#}{7}{6}{5}
Setting the A4 wide feature in
PCL
{#}{7}{6}{6}
Setting the line per page in
PCL
{#}{7}{6}{7}
Setting the font source in PCL
{#}{7}{6}{8}
Setting the font number in
PCL
{#}{7}{6}{9}
58
Selection
®
You can select the input tray that will be used in PCL printing.
{1} "#1" (default): Paper input tray
{2} "#2": Manual input tray
You can select the output tray that will be used in PCL printing.
{1} "#1" (default): Upper output tray (Up to approx. 100 sheets)
{2} "#2": Lower output tray (Up to approx. 50 sheets)
1. {MENU} i {#}{7}{6}{2} i {SET}
2. Enter the number of copies from "001" to "999", using the dial keypad.
L The default setting is "001".
3. {SET} i {MENU}
{1} "LETTER" (default): Letter size paper
{2} "A4": A4 size paper
{3} "LEGAL": Legal size paper
{0} "OFF": Deactivates this feature.
{1} "ON" (default): The document resolution will be automatically reduced
when the data size is too large to print.
Note:
L This feature may lower the print quality by reducing the resolution.
{1} "PORTRAIT" (default): The document will be printed in portrait direction.
{2} "LANDSCAPE": The document will be printed in landscape direction.
You can change the margin and printable area of A4 size recording paper so
that 80 characters in 10 cpi font may be printed on a line.
{0} "OFF" (default): Deactivates this feature.
{1} "ON": The margin and printable area of A4 recording paper will be changed.
To set the number of lines per page in PCL printing.
1. {MENU} i {#}{7}{6}{7} i {SET}
2. Enter the number of lines per page from "005" to "128", using the dial
keypad.
L The default setting depends on the recording paper size (feature #763)
and the recording paper direction (feature #765).
3. {SET} i {MENU}
This feature is available when the download font is registered to the unit.
{1} "RESIDENT" (default): The document will be printed using resident font.
{2} "DOWNLOAD FONT": The document will be printed using download font.
To set the font number to be used in PCL printing. The unit assigns a number
to each font.
1. {MENU} i {#}{7}{6}{9} i {SET}
2. Enter the font number from "000" to "054", using the dial keypad.
L The default setting is "000".
3. {SET} i {MENU}
Note:
L If feature #768 is set to "DOWNLOAD FONT", the default setting is "001".
L To print the font list, see page 88.