Kyocera KM-1820 User Manual page 7

Windows XP and Vista
Express Installation
User Guide
Note: KPrint installs a client port monitor that enables Windows TCP/IP printing to
any network card connected to Kyocera printing systems. KPrint supports LPR and
IPP printing. For the KPrint Installation instructions, refer to your CD. KPrint is now
a standalone installer.
Express mode applies to a Universal Serial Bus (USB) or a network connection only.
The installer finds the printer if it is turned on and connected by USB or network
cable. The Kyocera Scanner Driver (TWAIN) is installed automatically in Express
Mode. For the simple, default installation, select Express Mode.
Note: During any point in the installation process, if the Windows Security warning
dialog box appears, click Install this driver software anyway.
In the Custom Mode, you are able to choose which software packages to install and
specify the port. To use the Custom method, see
Note: In Windows Vista, the Kyocera Scanner Driver and WIA driver are installed
with the printer driver.
Windows XP and Vista
In Windows Vista, the installation dialog boxes have a slightly different appearance,
but the steps are the same.
1 For the simple, default connection select Express Mode and then click Next.
The Discover Printing System page opens and looks for your printer. If Discovery
does not find your printing system, ensure that it is properly connected by USB or
network cable and that it is turned on, and then retry Discovery.
2
At the Discover Printing System page, select the printing system you would like to
install and click Next.
Note: If the Found New Hardware Wizard appears, click Cancel. If the Hardware
Installation warning dialog box appears, click Continue Anyway.
3 In Printer Settings, you can assign a name to the printing system. This is the name
that appears in Windows Printers and Faxes and in the printer lists in applications.
Note: If your printer is connected locally, Printer Settings does not appear, skip to
step 4.
You can also choose to share this printer with others or set this printer as the default
printer. Make your selection from the following choices, and then click Next.
• Share your printers with others
• Set the printer system as the default
4 In the Confirm Settings page, click Install if the settings are correct. Click Back to
correct the settings.
Custom Installation on page 1-3.
Installation
1
2
3
4
5
1-2