Manual Duplex Printing - Kyocera KM-1820 User Manual

Printing Basics

Manual Duplex Printing

3-5
Printing with Custom Paper Sizes
1 Select Print from the File menu. From the application's Print dialog box, click
Properties.
2
In the Basic tab, select the name of your saved paper size in the Print Size list.
3
From the Source list, select the source cassette for the custom page size.
4 Click OK to return to the Print dialog box.
5 Click OK to start printing.
Manual duplex enables printing on both sides of a sheet for some models that do not
have a duplex unit. Manual duplex orders the print job so that after the first half of the
print job has been printed, the job can be flipped over and fed from the cassette for
the second side printing. Manual duplex is not available when any of the options in
the Publishing tab are used.
The steps for using Manual duplex may vary, depending on your printing system,
what optional devices are installed, and what application you are printing from.
The Print dialog boxes of some applications allow you to print just the odd or even
pages so that you can use manual duplex.
If the selected printing system does not have a duplex unit, a Manual duplex
checkbox is available in the Microsoft Word Print dialog box. When this option is
selected, the odd pages are printed first. The following message then appears on the
screen: Please remove the printout of first side from tray and place it in the input bin.
Then press OK to continue printing. This notifies the user to flip the printed pages
over and re-insert them in the cassette or tray of the printing system, and proceed to
print even pages.
Some Kyocera printing systems have a manual duplex setting in Printing
Properties in the Basic tab. Instructions for using this method for manual duplex
printing are below. If the Properties or Preferences dialog boxes for your printing
system don't have manual duplex settings, look for an option to print just odd or even
pages in the Print dialog box of the application you want to print from.
Manual Duplex Settings
• The printing system must be set to a local port.
- OR -
• When using a network port, select Enable manual duplex on network port in
the Compatibility Settings dialog box, accessed from the Device Settings tab.
See Compatibility Settings
compatibility settings.
• The Source selection must be Cassette 1 or Cassette 2.
Print on Both Sides
1
In the Basic tab, select Cassette 1 or Cassette 2 from the Source list.
on page 2-10 for instructions on changing
1
2
3
4
5
1
KX Driver