Data Filters Are Not Working; Cannot Add New Forms; Delete Unused Forms Before Adding New Forms; Defragment The Flash Memory - Lexmark 6500e Supplementary Manual

Data filters are not working

Check the Data Filters menu to see if the desired filter is enabled.

Cannot add new forms

Try one or more of the following:
D
ELETE UNUSED FORMS BEFORE ADDING NEW FORMS
D
EFRAGMENT THE FLASH MEMORY
The flash memory may be full. Defragmenting the flash memory frees space that is marked unavailable when files
are deleted. You can access this feature from the Printer Properties in Forms Manager.

Bar codes do not print as expected

These are possible solutions. Try one or more of the following:
M O
AKE SURE THE PTION
M
AKE SURE THAT THE
Print a Menu Settings page and make sure the Forms and Bar Code Option is listed under the Printer Information
heading.
For more information on printing menus, see the documentation that came with the printer.
W PCL 5
HEN USING A
USED TO GENERATE THE BAR CODE IS PROPERLY CONSTRUCTED
The escape sequence must begin with Esc and contain the #T parameter (not case-sensitive) for the bar code to be
generated. Default values are used for parameters not explicitly defined in the sequence.

Cannot generate bar codes using PCL emulation printer drivers

The option card does not support bar code printing with PCL XL or HPGL/2 emulation printer drivers. Only printing with
PCL 5 is supported.
D
ISABLE ADVANCED FEATURES USING A
1
From a Windows-based application, open the Print Properties dialog.
2
Click the Graphics tab.
3
From the Graphic mode list, select Auto select.
C
ARD IS COMPATIBLE WITH THE PRINTER ON WHICH IT IS INSTALLED
O C
PTION ARD IS INSTALLED
EMULATION PRINTER DRIVER
PCL XL
Troubleshooting
,
MAKE SURE THAT THE ESCAPE SEQUENCE
EMULATION PRINTER DRIVER
22