HyperTransport Configuration
HyperTransport Configuration
HT Width
HT Speed
HT Tristate Enabled
CRC Flood Enable
HT Width [ 8x16 BIT]
Allows selection of HyperTransport upstream data width.
Configuration options: [8x8 BIT] [16x16 BIT] [16x8 BIT] [8x16 BIT]
HT Speed [800 MHz]
Allows frequency selection of HyperTransport transfer from K8 CPU to AGP.
Configuration options: [200 MHz] [400 Mhz] [600 Mhz] [800 Mhz]
HT Tristate Enable [Disabled]
Enables or disables the HyperTransport Tristate that enables the tristate link during
the disconnected state of an LDTSTOP. Configuration options: [Disabled] [Enabled]
CRC Flood Enable [Disabled]
Enables or disables the CRC Flood that enable the generation of synchronized
packets on CRC Error. Configuration options: [Disabled] [Enabled]
MPS Configuration
MPS Revision
MPS Revision [1.4]
Sets the MPS revision value. Configuration options: [1.1] [1.4]
2-18
[ 8x16 BIT]
[800 MHz]
[Disabled]
[Disabled]
[1.4]
Chapter 2: BIOS Setup