Asus K8S-MX User Manual page 34

11. Digital Audio connector (6-1 pin SPDIF_OUT)
This connector is for the S/PDIF audio module to allow digital sound output.
Connect one end of the S/PDIF audio cable to this connector and the other
end to the S/PDIF module.
K8S-MX
K8S-MX Digital audio connector
The S/PDIF out module is purchased separately.
12. System panel connector (10-1 pin PANEL)
This connector accommodates several system front panel functions.
K8S-MX
K8S-MX System panel connector
• System Power LED Lead (Green 3-pin PLED)
This 3-pin connector connects to the system power LED. The LED lights up
when you turn on the system power, and blinks when the system is in sleep
mode.
• System Warning Speaker Lead (Orange 4-pin SPEAKER)
This 4-pin connector connects to the case-mounted speaker and allows you to
hear system beeps and warnings.
1-24
®
SPDIFOUT
®
PANEL
SPDIF_OUT
GND
+5V
PLED SPEAKER
RESET
IDE_LED
PWRSW
Requires an ATX power supply.
*
Chapter 1: Product introduction