Standard Cmos Features - Gigabyte GA-78LMT-S2 User Manual

Normal CPU Vcore
Displays the normal operating voltage of your CPU.
Normal CPU Vcore NB
Displays the normal operating voltage of your CPU North Bridge.
2-4

Standard CMOS Features

CMOS Setup Utility-Copyright (C) 1984-2012 Award Software
Date (mm:dd:yy)
Time (hh:mm:ss)
 IDE Channel 0 Master
 IDE Channel 0 Slave
 IDE Channel 1 Master
 IDE Channel 1 Slave
 IDE Channel 2 Master
 IDE Channel 2 Slave
Halt On
Base Memory
Extended Memory
: Move Enter: Select
F5: Previous Values
Date (mm:dd:yy)
Sets the system date.
Time (hh:mm:ss)
Sets the system time.
IDE Channel 0, 1 Master/Slave
IDE Channel 0, 1 Master/Slave
Configure your SATA devices by using one of the three methods below:
If no SATA devices are used, set this item to None so the system will skip the
• None
detection of the device during the POST for faster system startup.
• Auto Lets the BIOS automatically detect SATA devices during the POST. (Default)
Access Mode Sets the hard drive access mode. Options are: Auto (default), CHS, LBA, Large.
Capacity Approximate capacity of the currently installed hard drive.
IDE Channel 2 Master/Slave
Extended IDE Drive
Configure your SATA devices by using one of the two methods below:
• Auto Lets the BIOS automatically detect SATA devices during the POST. (Default)
• None If no SATA devices are used, set this item to None so the system will skip the
detection of the device during the POST for faster system startup.
Access Mode Sets the hard drive access mode. Options are: Auto (default), Large.
Capacity Approximate capacity of the currently installed hard drive.
Halt On
Allows you to determine whether the system will stop for an error during the POST.
Options are: "All Errors," "No Errors," "All, But Keyboard". (Default)
Memory
These fields are read-only and are determined by the BIOS POST.
Standard CMOS Features
Thu, Apr 19 2012
22:31:24
[None]
[None]
[None]
[None]
[None]
[None]
[All, But Keyboard]
640K
766M
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 25 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults