Table of Contents
Advertisement
XIA4225 OPERATION
Specifications
10
CEA-2006 Power Standard Specifications
(reference: 14.4VDC +/-0.2V, 20Hz~20kHz)
Power Output:
150 Watts RMS x 2 channels at 4 ohms and < 1% THD+N
Signal to noise ratio:
Additional power output:
200 Watts RMS x 2 channels at 2 ohms and < 1% THD+N
400 Watts RMS x 1 channel at 4 ohms (bridged) and < 1% THD+N
Dynamic power:
800 Watts at 4 ohms (bridged)
Speaker output impedance:
illuminite output voltage:
illuminite output
current: 2 amp
Low level input range:
High level input range:
Bass boost:
0~12dB @ 45Hz
Crossover range:
Crossover slope:
Power supply:
11-16 VDC, negative ground
Fuses:
30 amp ATO x 2, 2 amp ATO x 1
Amplifier dimensions:
Typical installation dimensions:
74dBA (reference: 1 watt into 4 ohms)
2~8 ohms (stereo), 4~8 ohms (bridged)
12VDC
200mV~6V (10k ohms)
2V~10V (100 ohms)
40~400Hz
12dB/octave
16.92" x 2.36" x 9.84" (WxHxD)
(430 x 60 x 250 mm)
18" x 3.5" x 11" (WxHxD)
(457 x 89 x 279 mm)
Advertisement
Table of Contents
